Blower

1,

Product Parameters:

Range of flow rate: 100-2000m³/min 
Range of operating REV: 4000-13000r/min

2,

Range of Pressure:

outlet pressure is less than 4ata, and the compression ratio is less than 3.5

GM series air blower is of the structure of a single-stage overhung type, axial intake and radial exhaust. Air passes through the inlet duct with silencer and enters suction pipe and inlet guide vane. This is connected by the main driver through coupling to speed-increasing gear, which increase the air pressure by driving the 3D mixed-flow semi-closed impeller rotating at high speed. The air is exhausted through the diffuser, spiral housing and diffusing pipe. The lube oil is supplied by the main oil pump which is connected directly to the driving shaft, and by the electric auxiliary oil pump when starting and shutting down. The axial thrust of the high speed rotor is transferred from the thrust collar to the low speed shaft, greatly reducing the mechanical losses.

Structure of GM series blower

• Inlet guide vane mechanism 
• Diffuser 
• Volute  
• High speed rotor 
• Speed increasing box 
• Bearing 
• Bull gear 
• Coupling 
• Lubricant system 
• 3D semi-closed mixed-flow type impell

Process Manufacturing:

Preliminary product design—design review—coordination of product with the user’s designing institute—design validation—manufacturing—product assembling—commissioning—product packaging and delivery

Ordering Cycle:8-12 months

Means of Transportation:vehicles or shipping

Materials:

made of the following materials depending on different compressor's medium, temperature and pressure