Compressor

1,

Product Specifications: 

For example MCL408 as 

    M for Horizontally-split compressors 
    CL for vaneless diffuser 
    40 for nominal impeller diameter of 40cm, i.e. 400mm 
    8 for 8 impellers inside the cylinder, i.e. 8-stage

2,

Product Parameters:

Inlet volume flow:2000m³/h- 650000 m³/h 
Operating REV: n=2800—18000r/min 
Outlet pressure is less than 40ata

Product Features:

The axial flow compressor relatively features low compression ratio, large flow rate, long period of stable running, easy repair and maintenance, suitable for applications requiring large flow rate and small compression ratio.

Manufacturing Materials:

Rotor: Ni-Cr-Mo alloy steel
Rotor vane: 2Cr13
Inlet guide vane and stationary vane: 2Cr13
Inlet casing: 16MnR/Q235-A
Central casing: 20# forged piece 
Outlet casing: 16MnR/Q235-A
Inlet auxiliary casing: cast steel 
Outlet auxiliary casing: cast steel 
Outer cylinder: Q235-A
Bearing casing: Carbon steel 
Sealing strip: Stainless steel 
Foundation: Carbon steel

MA axial blower typical model and range

Manufacturing Materials:

Made of the following materials depending on different compressor’s medium, temperature and pressure